Manufacturer Bally Midway

Baby Pac-Man

Set of screen printed sideart

Set of two pieces of Bally Midway Baby Pac-Man arcade game sideart that was printed about 15 years ago. We found this set in a pile of artwork we were using for restorations years ago, we believe it was printed by Arcade Renovations quite a while ago. Sideart has pre-mask that is slightly dirty from sitting, but should apply fine.  Each piece measures approximately 19 7/8" x 23 7/8".

Listing is for two pieces of sideart.

Year 1983
Related Game Title Baby Pac-Man
Genre Labyrinth/Maze
Quick Game Facts
Baby Pac-Man

A unique game that combines challenging Maze action with pinball.

You play Baby Pac-Man who must navigate various mazes. Unlike Pac-Man and Ms. Pac-Man, you can also "escape" to the playfield to rack up addition points, get an extra Pac-Man, or increase the fruit value. Most importantly, you use the playfield to earn "Power Ups" so that you can chase the ghosts.

Coin-Op Overview

This game has a 13" monitor oriented vertically on the top half. You move Baby Pac-Man using a 4-way joystick. When you choose to "escape" to the pinball playfield, you use two flipper buttons to control the flippers. There are actually four buttons -- two are mounted on the side of the game as a traditional pinball game, and two are located on the front of the control panel in a traditional arcade manner.

Game play is significantly more difficult in the maze area as the ghosts are much "smarter" than in Pac-Man and Ms. Pac-Man. This game is fairly collectible due to its unique nature and the fact that the pinball play is challenging to realistically emulate.

Coin-Op Technical Details
Year: 1982
Manufacturer: Bally Midway
Genre: Labyrinth/Maze
Players: 2P
Conversion Class: unique
Monitor Type: Raster
Orientation: Vertical
Monitor Resolution: CGA